Replacement V8 Motor Mounts P/N V8HB-MM $130.00 + $21.40 Shipping (Nevada Res. add NV sales tax) All Alaska, Hawaii and international orders must e-mail for shipping costs. Canada $130.00 (US) + $54.65 Shipping |
These motor mounts have been specially designed and hand-made by Bob Gumm to replace your factory V8 mounts. Factory mounts are no longer available and even if you can find them you'll pay over $200.00 for them. Our mounts were designed using factory mounts as a template and with future replacement costs in mind. After just a few months original mounts begin to sag, but not our mounts. Our mounts are designed using an off-the-shelf mount that by design resists sagging. When the rubber mounts finally do need replacement, they can be replaced inexpensively from your local parts store. Because these mounts maintain their original form you'll get back the clearance between the oil pan and K-frame/steering components. Some customers have reported reduced clearance between the engine and hood with these mounts. Our mounts aren't taller, the original mounts sag so badly that the engine eventually sat lower. Our mounts bring the engine back up to where it should be and as a result there is less clearance between some induction systems and the hood. These mounts are now available for immediate shipment.
|
|
| 
Big Block V8 Vega Engine Swap Kit P/N V8HB-BBMP $250.00 (US) + $38.00 Shipping (Nevada Res. add NV sales tax) All Alaska, Hawaii and international orders must e-mail for shipping costs. (Canada $250.00 + $61.00 Shipping)
|
This BBC 396-427-454-502 V8 Vega Engine Swap Kit is designed to fit with the Hooker Super Competition Engine Swap Headers (P/N 2240) for the popular BBC Vega engine swap, this kit will make dropping in the BBC a cinch. Hooker swap headers and mounts were designed to provide an exact fit when used together. They add the extra horsepower and torque the serious enthusiast demands and are considered the single best improvement you can make for performance. Ever tried to match your engine angle to the pinion angle? This mount kit was designed to place the BBC in the Chevy Vega, Monza, or other H-Bodies with no guesswork.
|
OCCASIONALLY STOCK RUNS OUT DUE TO UNFORESEEABLE EVENTS. ITEMS MAY NOT SHIP IMMEDIATELY AND CAN TAKE UP TO 2-4 WEEKS FOR SHIPPING. |
For order information, see our online catalog http://www.v8monza.com/catalog